Quantitative assessment and optimization of parallel contact model for flexible paddy straw: a definitive screening and central composite design approach using discrete element method.

To simulate the bending behaviour of paddy straw at varied moisture contents after crop harvesting, we created a flexible paddy straw specimen model based on the Hertz-Mindlin with parallel contact bonding model using the discrete element model (DEM) approach. The research presented in this study aims to investigate a new approach called Definitive Screening Design (DSD) for parameterizing and screening the most significant parameters of the DEM model. This investigation will specifically focus on the three-point bending test as a means of parameterization, and the shear plate test will be used for validation purposes. In addition, the most influential DEM parameters were optimized using another Design of Experiments approach called Central Composite Design. The findings from the DSD indicated that parameters such as bonded disk scale, normal stiffness, and shear stiffness have the highest impact on the bending force, while the coefficient of static friction (Straw-Steel) has the least effect. The three bonding parameters were respectively calibrated with the loading rate (0.42, 0.5, and 0.58 mm s-1) and a good agreement between actual and simulated shear force at moisture content M1-35 ± 3.4%, M2-24 ± 2.2% and M3-17 ± 2.6%. Modelled stem helps simulate the straw with low error and increases the accuracy of the simulation. The validated model, with an average relative error of 5.43, 7.63, and 8.86 per cent, produced reasonable agreement between measured and simulated shear force value and loading rate.

Conventional and Zero Tillage with Residue Management in Rice-Wheat System in the Indo-Gangetic Plains: Impact on Thermal Sensitivity of Soil Organic Carbon Respiration and Enzyme Activity.

The impact of global warming on soil carbon (C) mineralization from bulk and aggregated soil in conservation agriculture (CA) is noteworthy to predict the future of C cycle. Therefore, sensitivity of soil C mineralization to temperature was studied from 18 years of a CA experiment under rice-wheat cropping system in the Indo-Gangetic Plains (IGP). The experiment comprised of three tillage systems: zero tillage (ZT), conventional tillage (CT), and strip tillage (ST), each with three levels of residue management: residue removal (NR), residue burning (RB), and residue retention (R). Cumulative carbon mineralization (Ct) in the 0-5 cm soil depth was significantly higher in CT with added residues (CT-R) and ZT with added residues (ZT-R) compared with the CT without residues (CT-NR). It resulted in higher CO2 evolution in CT-R and ZT-R. The plots, having crop residue in both CT and ZT system, had higher (p < 0.05) Van't-Hoff factor (Q10) and activation energy (Ea) than the residue burning. Notably, micro-aggregates had significantly higher Ea than bulk soil (~14%) and macro-aggregates (~40%). Aggregate-associated C content was higher in ZT compared with CT (p < 0.05). Conventional tillage with residue burning had a reduced glomalin content and ß-D-glucosidase activity than that of ZT-R. The ZT-R improved the aggregate-associated C that could sustain the soil biological diversity in the long-run possibly due to higher physical, chemical, and matrix-mediated protection of SOC. Thus, it is advisable to maintain the crop residues on the soil surface in ZT condition (~CA) to cut back on valuable C from soils under IGP and similar agro-ecologies.

Evaluation of phytoremediation capability of French marigold (Tagetes patula) and African marigold (Tagetes erecta) under heavy metals contaminated soils.

The pot experiment was conducted to explore the phytoremediation potential of two different marigold species grown in heavy metals contaminated red, black, alluvial, recent river clay, sewage irrigated, sewage sludge, and garden soil. Different soil types were treated uniformly with lead (20 mg Pb kg-1 soil), cadmium (5 mg Cd kg-1 soil), chromium (30 mg Cr kg-1 soil) and nickel (10 mg Ni kg-1 soil). Completely randomized design (CRD) was used with three replications. African marigold (Tagetes erecta) recorded ∼89.4% more dry matter yield over French marigold (Tagetes patula) when grown under metals treated soils. Both the marigold species were highly effective for removing Cd and Ni from contaminated soils (TF >1) however, Ni (TF ∼14.9) was more efficiently accumulated by T. patula and Cd (TF ∼12.1) by T. erecta. Higher biomass yield in T. erecta resulted higher accumulation of heavy metals (except Cr) compared to T. patula. Assessment of contamination factor (CF) and geo-accumulation index (Igeo) of heavy metals indicates that post-harvest soils had moderate to high degree of contamination by different metals, Cr being the highest. It may be concluded that T. erecta was more efficient in extracting heavy metals from different heavy metals contaminated soils.Novelty statement Contamination of land with heavy metals poses severe environmental threats. Physical and chemical remediation techniques are generally used for remediating metals contaminated sites. These methods are cost-intensive and therefore, commercially non-viable, besides being disruptive in nature and causing deterioration of soil. Alternatively, bio-remediation techniques are cost-effective and environment friendly. Among the various phytoremediation techniques, hyperaccumulator plants are most commonly used for the remediation of the contaminated sites. It has been found that different species of the same plant (marigold) differ in their ability to accumulate metals under various contaminated soils having different properties. Thus, this experiment provided an unique opportunity to investigate the effect of various soil properties on metal accumulation efficacy of marigold under metal-spiked soils. Marigold plants can grow rapidly by developing a robust root system which helps them to survive under contaminated soil environment. Thus, marigold being ornamental plant could be used to decontaminate polluted sites while providing ornamental value and may serve as a source of commercially valuable products extracting metals from biomass by way of incineration. However, meager information is available about the usage of various marigold species for phytoremediation of heavy metals under different metal-polluted soils. In the current experiment, we intend to evaluate the potential use of two different marigold species (Tagetes patula and Tagetes erecta) in remediating heavy metals under nine soils of different nature spiked with metals and assessing heavy metals pollution load indexes in these polluted soils.

Spatial variability of arsenic in Indo-Gangetic basin of Varanasi and its cancer risk assessment.

The Indo-Gangetic alluvium is prime region for intensive agricultural. In some areas of this region, groundwater is now becoming progressively polluted by contamination with poisonous substances like arsenic. Intensive irrigation with arsenic contaminated ground water in dry spell results in the formation of As(III) which is more toxic. Thus groundwater quality assessment of Gangetic basin has become essential for its safer use. Therefore we under took study on the spatial variability of arsenic by collecting georeferred groundwater samples on grid basis from various water sources like dug well, bore and hand pumps covering the river bank region of Ganga basin. Water quality was investigated through determination pH, EC, TDS, salinity, Na, K, Ca, Mg, SAR, SSP, CO3, HCO3, RSC, Cl, As, Fe, Zn, Mn and Cu, etc. Results pointed severe As contamination in ground water of three sites of the study area. ARC GIS software is now able to process maps along with tabular data and compare them well, to provide the spatial visualization of information and using this tool, the Geographical Information System (GIS) of arsenic was developed. It was noticed from spatial maps that concentration of arsenic was more near the meandering points of Ganga.